Operating Instructions
1. Push the cannula breathing tube firmly on to the
oxygen tube connector.
2. Adjust your cannula breathing tube to the proper
position so that you will be able to breathe the oxygen
comfortably.
3. Turn the flow control knob on top of the Hi Flow
Stroller clockwise until the prescribed flow rate
(numeral) is visible in the knob “window” and a
positive detent is felt.
Warning:
Out-of-specification oxygen flow will result
if the flow control knob is set between flow rates.
4. You should be receiving oxygen now. To stop flow of
oxygen, turn the flow control knob counterclockwise
to the off (0) position.
10
Hi Flow Stroller
*Cannula is not included
Caution:
Always turn the
flow control knob off (0)
when not in use.
