CAIRE HELiOS Marathon, Руководство пользователя

Страница: 2 / 12

2 - ENG PN 21033264 B | User Manual
HELiOS 300 & 800
Symbols Glossary
ISO 7000; Graphical symbols for use on equip-
ment—Index and synopsis
Read user’s manual before operation.
Reg. # 1641
Operating temperature limitation of
these units is 14°F to 104°F (-10°C to
40°C). Storage temperature limitation
range is -40°F to 158°F (-40°C to
70°C). Reg. # 0632
Keep away from rain, keep dry. Reg.
# 0626
Name and address of manufacturer.
Reg. # 3082
Caution, consult accompanying docu-
ments. Reg. # 0434A
Catalog Number. Reg. # 2493
Serial Number. Reg. # 2498
This way up. Reg. # 0623
Fragile, handle with care. Reg. #
0621
ISO 7010: Graphical symbols—Safety colors
and safety signs—Registered safety signs
Frostbite may occur on contact with
cold liquid or gaseous oxygen, or
frosted parts. Warning low tempera-
ture. To warn of low temperature or
freezing conditions. Reg. # W010
Keep away from open flame, fire,
sparks. Open ignition source and
smoking prohibited. Reg. # P003
Do not smoke near unit or while
operating unit. Reg. # P002
Type BF applied part (degree of
protection against electric shock).
Reg. # 5333
Warning. Reg. # W001
Council Directive 93/42/EEC; concerning medi-
cal devices
Authorized representative in the
European Community
This device complies with the
requirements of Directive 93/42/EEC
concerning medical devices. It bears
the CE marking as shown.
This device complies with the re-
quirements of Directive 2010/35/EU
concerning medical devices. It bears
the pi marking as shown.
ADR: European Agreement concerning the
International Carriage of Dangerous Goods
by Road
Non-toxic gas.
Hazard Oxidizing substances: fire
intensifying risk. Oxidizing agents
cause fires to burn more vigorously.
Refrigerated Liquid, USP; Produced
by Air Liquefaction
Internal Symbols
Keep unit well ventilated at all times
Keep away from flammable materials,
oil and grease.
Portable Empty
Portable Full
Always keep Portable in one of the
following positions: upright, flat on
its back, or any position in between.
Wipe connector with clean dry cloth
before filling.