10
Bracing
3/4” tek screw
Purlins
Main Support Angles
20”
Secure bracing to all four sides using (2) x 3/4” Tek
Screws for each connection.
Should the purlins run in the direction as shown, the
main support angles will need to change direction. It
may be possible to suspend the ‘droppers’ directly
from the purlins without having to use the main
support angles.
Determine direction of fold
down ladder in relation to
direction of purlins. If not in
line with purlins, see below.
Rear bracing to be fixed
at least 20” from bottom
of suspension hangar to
allow for ladder assembly
clearance when closed.
All assembly and fixing
procedure as per ‘in line
purlin’ option.
PURLINS 90 DEG TO SUSPENSION FRAME
7
DISTRIBUTED BY © CAI Safety Systems | (951) 465-7386 | https://caisafety.com | [email protected]
