23
MAINTENANCE
/ /
DATE
SYSTEM MAINTENANCE CHECKLIST
COMPONENT
INSPECTION CRITERIA
PASSED FAILED
CORRECTIVE ACTION
COMPLETION
DATE
•
Check for any visible damage
to the ladder which could
cause failure or injury to
operator.
•
Check structure to which lad-
der is attached is suitable for
the required loads - 500lbs
1. Check fixing bolts (6) to
structure are secure
2. Check door hinge bolts are
secure
3. Check fixing bolts of red strut
arms to ladder are secure.
Note: These must be firm but still
allow hinge to function correctly.
4. Check door mount fixings to
primary ladder body are secure
5. Check all ladder body hinge
bolts are secure. Note: These
must be firm but still allow hinge to
function correctly.
6. Check fixings into splice feet are
secure and feet positoned
correctly to support ladder.
1
2
3
5
5
6
3
3
4
5
5
3
4
The checklist below outlines key checking criteria required to ensure the safe use of this system. Any item of concern not
shown on the checklist must be noted on the maintenance report and brought to the attention of the workplace manager.
Items
PASSED
- means they conform with the required checking criteria and are suitable for normal use until the next
recertification date. System data plates must be updated showing current check date and next check date.
Items
FAILED
- means they do not conform to the required checking criteria. These items must be clearly tagged ‘Do
Not Use’ and the required corrective actions put in place. The maintenance report must clearly document all
non-conforming criteria.
This system must be maintained by a competent height safety inspector trained in the safe use and maintenance of this system.
Installation must be in accordance with the checklist provided (page #).
DISTRIBUTED BY © CAI Safety Systems | (951) 465-7386 | https://caisafety.com | [email protected]
