4
Tools Required for RL60 Series Fold Down Ladder Installation
• Cordless Drill
• 5/16” Metal Drill Bit
• 5/16” Nut Setter
• 1/2” Wrench
• Tape Measure
• Marking Pen
• Spirit Level
MAINTENANCE
1.
The RL60 fold down ladder system needs to be checked and re-certified by a competent height safety inspector every 12 months for
non-corrosive environments or 6 monthly for corrosive or harsh environments. (To be determined by competent person depending on severity of
surrounding conditions.)
2.
Never clean using acids or other chemicals that could damage the system components.
3.
Any deterioration or damage to the system or equipment must be reported to the person in control of the workplace and relevant correction action
undertaken.
4.
Fixing and support structure attachment and suitability must be checked by competent person.
5.
Any signs of distortion or excessive load to the fold down ladder system must be inspected and re-certified by competent person.
6.
The identification label must be completed confirming certification, maintenance and recertification of the system.
7.
Maintenance inspections must be clearly documented. Any non-conformance must be clearly identified and tagged ‘Do Not Use’ until corrective
action by a competent person has been completed.
DISTRIBUTED BY © CAI Safety Systems | (951) 465-7386 | https://caisafety.com | [email protected]