12.
Continued on next page... >>
PROGRAMMING THE QUANTITY - Continued
NOTE:
The quantity of coffee dispensed may be programmed,
from a minimum
of 30ml to a maximum of 250ml
.
NOTE:
Recommend for Programming/Factory Programming:
-30ml: Single Espresso Shot
-60ml: Double Espresso Shot
-120ml: Tea (& Hot Water Button)
*Quantities are approximate and may vary between capsules.
7.
Place a cup or
mug under the
Dispensing Spout
.
Press and hold
the desired
beverage button.
On reaching the
desired amount
of beverage,
release the button.
Now the button
is programmed
to your desired
amount.
6.
Raise the
Lever
to
open the
Capsule
Compartment
to eject the used
capsule and lower
the
Lever
.
9.
GENERAL OPERATING INDICATIONS
When the
Indicator Light
blinks ORANGE
and the machine
emits
3 beeps
it’s advisable to
perform the
Descaling Cycle.
Refer to
Page 15
for Descaling
instructions.
DESCALING SIGNAL:
HEATING SIGNAL:
1.
2.
When all the
button lights blink
continuously,
the machine is
warming up.
5.
Содержание S24
Страница 23: ...23 NOTES...
