ENCORE VENTI Rev. 3 2021-10
www.cafection.com 800-561-6162
22
SERVICE & INSTALLATION MANUAL for Cafection's Encore Venti
4.8
Adjusting the Tank Overflow Cup
The overflow cup is a safety feature. If the water tank overflows, the extra water will leak
in the pipe down to the overflow cup. If there is too much water, the float will go up and
activate the switch. The machine will then stop automatically.
It is important to verify that the float is positioned properly in the overflow cup because it can
move around in transportation. If the float is not properly in place, the switch will be activated
and the unit will automatically shut down sensing an overflow situation. The computer
screen will stay ON showing an error message.
It is important to verify that the overflow cup is in place with the highest side facing front
and well secured with the green tape. If the cup needs to be removed, make sure that it
is replaced with the highest side facing front and the overflow tube in the cup. Fasten it in
place with tape. This will ensure the float works properly and activates the overflow switch if
a problem occurs.
Cup
Hole in the exit
of the tube
Switch deactivated
The unit is on.
Overflow switch activated
The unit shuts down.
Highest side
facing front
Location of the cup
in the brewer
In
it
ia
l S
e
tu
p
