Document type:
Title:
Revision date:
Revision:
Installation Guide (MUT)
Mod. SY1527, universal multichannel power supply system
03/12/02
3
NPO:
Filename:
Number of pages:
Page:
00103/97:1527x.MUTx/03 HWGUIDE_REV3.DOC
62
56
7.3.3
Remote Operation via Web Browser
This feature will be available with the Software Version 2.00 or later.
7.3.4
Remote operation via Host Computer
This feature will be available with the Software Version 2.00 or later.
7.4 Cabling
The following sections provide instructions for cabling the SY1527 in the various set-ups
summarised in § 7.3, p.54.
7.4.1 Standalone
operation
The definition of standalone operation and the relevant hardware set-ups are given in
§ 7.3.1, p.54 and sketched in Fig. 7.1, p.54.
Standalone operation without the use of an external keyboard or VGA monitor requires
only to connect the system to the mains as described in § 7.1.3, p.53.
NOTICE
PRESENTLY, AN EXTERNAL KEYBOARD IS MANDATORY TO INPUT THE
ALPHANUMERICAL DATA!
Standalone operation with an external keyboard and VGA monitor requires, besides the
connection of the system to the mains, the following operations:
A
)
To connect an external keyboard
1. Check that the keyboard is a standard PS/2 keyboard;
2. Identify the PS/2 connector located in the Interface Bus section on the front
panel (on the right of the keypad and compact switch);
3. Plug the keyboard into the PS/2 connector (see also Fig. 7.3, p.57);
B
)
To connect an external VGA monitor
1. Check that the monitor to be connected is a standard VGA monitor;
2. Identify the VGA port (see also Fig. 7.3, p.57) located in the Interface Bus
section on the front panel (on the right of the keypad and compact switch);
3. Plug the VGA monitor into the VGA port.