Caen 803 Series, Руководство пользователя

Страница: 2 / 29

Purpose of this Manual
This document is the 803x Series 8-16 Ch. Programmable HV Power Supplies User's Manual; it
contains information about the installation, the configuration and the use of the units.
Change Document Record
Date Revision Changes
30 May 2019 0 Preliminary Release
20 December 2019 1 Updated power requirements
21 July 2020 2 Updated Technical specifications table
28 January 2021 3 Updated power requirements, Technical specifications table
5 February 2021 4 Updated Technical specifications table
25 February 2021 5 Updated power requirements, Technical specifications table
23 March 2021 6 Updated Technical specifications table
7 May 2021 7 Updated Technical specifications table, External connections
12 May 2021 8 Updated Software tools
8 June 2022 9 Updated power requirements, Technical specifications table
19 December 2022 10 Updated with 8034H series data
Manufacturer Contacts
CAEN S.p.A.
Via Vetraia, 11 55049 Viareggio (LU) - ITALY
Tel. +39.0584.388.398 Fax +39.0584.388.959
www.caen.it | info@caen.it
© CAEN SpA – 2021
Limitation of Responsibility
If the warnings contained in this manual are not followed, CAEN will not be responsible for damage caused by improper
use of the device. The manufacturer declines all responsibility for damage resulting from failure to comply with the
instructions for use of the product. The equipment must be used as described in the user manual, with particular regard
to the intended use, using only accessories as specified by the manufacturer. No modification or repair can be performed.
Disclaimer
No part of this manual may be reproduced in any form or by any means, electronic, mechanical, recording, or otherwise,
without the prior written permission of CAEN spa. The information contained herein has been carefully checked and is
believed to be accurate; however, no responsibility is assumed for inaccuracies. CAEN spa reserves the right to modify
its products specifications without giving any notice; for up to date information please visit
www.caen.it .
Made in Italy
We remark that all our boards have been designed and assembled in Italy. In a challenging environment where a
competitive edge is often obtained at the cost of lower wages and declining working conditions, we proudly acknowledge
that all those who participated in the production and distribution process of our devices were reasonably paid and
worked in a safe environment (this is true for the boards marked "MADE IN ITALY", while we cannot guarantee for third-
party manufactures).