CAEN
Electronic Instrumentation
803x Series 8-16 Ch. Programmable HV Power Supplies
17
Options available:
Zoom: zoom on voltage and current monitor
Page: access to Channel 4 ÷ 7; 8 ÷ 11; 12 ÷ 15 (depending on number of channels present)
1/3: access to Group parameters:
GROUP MENU ←
MaxV
RampUp
RampDown
Trip
RampDown
PowerDown
IMonRange
Chan
2/3
GROUP MENU ←
VTC
Dis/En
KT
V/°C
T Step
T Ref
T Ext
Chan
3/3
For the Group of all channels, the following parameters can be programmed and monitored either locally
or remotely:
Parameter:
Function:
Unit:
Vmon
High Voltage Monitored value single channels
Volt
Imon
Current Monitored value single channels
µA
Status
ON/OFF; Ramp UP/DOWN; OVV; UNV; OVC; OVP; MAXV; TRIP; OVT; OFF; KILL; ILK;
CAL_ERR single channels
Vset
High Voltage programmed value
Volt
Iset
Current Limit programmed value
µA
MaxV
Absolute maximum High Voltage level that the channel can reach
V
Ramp-Up
Maximum High Voltage increase rate
V/s
Ramp-Down
Maximum High Voltage decrease rate
V/s
Power Down
Power Down mode after channel TRIP
KILL or RAMP
Trip
Maximum time
an “
overcurrent" can last
s
Imon Range
Current Monitor Zoom
H or L
Parameters available only with x8031 series:
VTC
Enable Temperature compensation
KT
Coefficient of Temperature compensation
V/°C
T Ref
Reference Temperature
°C
T Step
Programmed Interval of Temperature compensation
°C
T Ext
External Temperature
°C
To set one parameter, tap on the relevant name, and change and/or enter the desired value through the
“virtual keypad”; confirm with “Enter”. Tap the red arrow to go back to
Main Menu.