LiAM User’s Manual
Annex A - Output Connectors
85
Annex A - Output Connectors
Connections to the load must be carried out considering that the DC output
connector pinout, made by terminal blocks, is presented in
Figure 30
:
Figure 30:
output connector pinout
The corresponding pinout is:
pin 1
: positive output terminal;
pin 2
: negative output terminal;
as indicated on the label that can be found over the terminal connector (where also
output current and output voltage ratings are presented).
Suggested cable section for output is 1.5 mm
2
– 2 mm
2
, or 15 AWG - 14 AWG.
WARNING
Please be aware that the output voltage of the LiAM 6005 module can
reach a maximum of ±60V so that the screw terminals of these connections
can be found at a high voltage with respect to EARTH potential.
PIN 1:
OUT+
C
PIN 2:
OUT-
C
