CAE 2765, Руководство по эксплуатации

Страница: 32 / 42

- 32 -
CLEANING THE VALVE BLOCK
• Separate the air pipes (H) from the valve block
(V).
• Clean the valve block (V) using compressed air.
The valve block may need to be replaced.
• Clean the silencers (S). If these are damaged,
they must be replaced.
SETTING THE MOUNTING HEAD
•
Loosen the fixing screw (1) on the mounting
head
• The angle of the mounting head to the rim can
be set by tightening and/or loosening both
grub screws (2)
• The bead guide (4) projects approx. 6-7 mm
over the rim flange. The approach roller (3)
contacts the rim flange.
• After setting, ensure that both grub screws (2)
and the fixing screw (1) are secured again.
CHECKING AND REFILLING THE GEAR OIL
•
Turn the clamping plate to a position from
which it is easy to access the oil filler neck
• Now remove the protective cover
• Insert a flexible and transparent hose into the
opening and stop when the hose contacts the
base of the gear unit.
•
Now, hold the end of the hose shut so that no
more air can get in.
• Next, remove the hose. The oil level must be at
least 25 mm.
• If necessary, refill with the required amount of
oil.
3