CAE 2765, Руководство по эксплуатации

Страница: 31 / 42

- 31 -
V-BELT TENSIONING
• The machine contains a motor (1) which
drives the worm gear (3) using a V-belt (2).
• In order to tension, you must loosen the
motor fixing screws.
• Next, loosen the counter nut (B)
• The V-belt is tensioned by turning the
3
screw (A).
o
When pressed down (in the centre),
the V-belt should give by a
maximum of 8 mm.
1
2
• The counter nut (B) and all motor fixing
screws must be tightened for final fixing.
• The final stage is to reassemble the cover.
PNEUMATIC LOCKING OF THE MOUNTING HEAD
B
A
• The force and/or tension of the cylinder is
set by tightening and/or loosening the
screw (B).
• The automatic distance to the rim is set by
tightening and/or loosening the nut (A).
SWIVEL SPEED
• The swivel speed to the front and/or rear can
be set by opening and/or closing the valves
(A+B).