
TR-MAN-4000
Operator's Manual - 4000 Series Traveller
Page 43 of 158
Cadman Power Equipment Limited ▪ BOX 100, Courtland, Ontario, Canada N0J-1E0 ▪ Phone: 519-688-2222 ▪ Fax: 519-688-2100 ▪ www.cadmanpower.com
If you set the retrieval rate on the second, third, or fourth layer then you must set the
B )
speedometer reading to match the appropriate value on the speed conversion chart.
The speedometer will only give actual hose speed for the base layer.
Figure 43 - Speed Conversion Chart Label
img-00255-B
Retrieval rate will be incorrect if the appropriate hose layer setting id used.
This will result in an incorrect irrigation pull, which may damage crops.
Speed Selection Example
For this example, a retrieval rate of 30 inches per minute is needed, and the hose speed
will be set when the drum is on the second layer.
Find the 30 inches per minute on the base layer row, and then read the 2nd layer row
A )
value that crosses with the 30 inches per minute column. The corrected Value is 27
inches per minute
Set the speedometer for the corrected value of 27 inches per minute.
B )
The actual retrieval rate you will be irrigating at will be 30 inches per minute.
C )
If you need to verify the retrieval rate then measure the hose movement for 3 minutes.
D )
Divide the inches the hose has travelled by 3. This will be your retrieval rate in inches
per minute.
Содержание 3750XL
Страница 2: ......