
TR-MAN-4000
Operator's Manual - 4000 Series Traveller
Page 17 of 158
Cadman Power Equipment Limited ▪ BOX 100, Courtland, Ontario, Canada N0J-1E0 ▪ Phone: 519-688-2222 ▪ Fax: 519-688-2100 ▪ www.cadmanpower.com
Verify the engine fuel valve is in the off position by pulling it to the right. The engine fuel
B )
valve is located on the rear side of the engine as shown. If the engine fuel valve is not
off you must switch it to the off position before towing.
If you need to shut the engine fuel valve off immediately after use, avoid touching the
engine.
Figure 11 - Shut Fuel Valve
img-01422
Failure to verify that the engine fuel valve is off before towing will result in
the fuel system remaining on during transport. This may lead to damage to
the traveller.
The engine will be hot due to running continuously while doing irrigation
pulls. Touching the engine during, or after an irrigation pull without time to
cool down will lead to operator injury.
Verify that the drum brake is applied. If the drum brake is not applied, you must apply it
C )
before towing.
Failure to verify that the drum brake is applied may lead to the drum
rotating during transport. This may lead to damage to the traveller.
Содержание 3750XL
Страница 2: ......