
TR-MAN-4000
Operator's Manual - 4000 Series Traveller
Page 144 of 158
Cadman Power Equipment Limited ▪ BOX 100, Courtland, Ontario, Canada N0J-1E0 ▪ Phone: 519-688-2222 ▪ Fax: 519-688-2100 ▪ www.cadmanpower.com
Every 250 Hours
MAINTENANCE ITEM
PROCEDURE
Inspect sprinkler cart wheel
bearings
Disassemble, clean, inspect, and repack sprinkler cart
wheel bearings with new grease. Replace any worn,
broken, or defective parts as needed.
Table 8 - Every 250 Hours
Before Storage
When the traveller is placed in storage for more than one day, the hose must be
completely emptied.
MAINTENANCE ITEM
PROCEDURE
Drain the hose
Pull the hose out in a level area leaving at least 1 full coil
on the drum. Remove the drain plug from the gun cart,
then reel the hose in with either the Honda engine on the
traveller or a tractor PTO shaft. Adjust the hose while it
is reeling in so that the coils are tightly packed.
Do not leave the traveller unattended during this
procedure.
Leaving the traveller unattended may result
the hose wrapping on the drum incorrectly.
This will lead to damage to the indexing
system, hose, and/or the traveller.
Clean the variable speed
pulley
Remove the moving face of the variable speed pulley.
Remove all containments from the bronze bushing and
shaft. Lubricate the shaft and bushing using light oil.
Inspect traveller wheel
bearings
Disassemble, clean, inspect, and repack wheel bearings
with new grease. Replace any worn, broken, or
defective parts as needed.
Lubricate all chains
Use a brush to apply grease to all chains. See page
147.
Prepare Honda engine for
storage
Refer to Honda engine manual for storage preparation
procedure.
Table 9 - Before Storage
Содержание 3750XL
Страница 2: ......