Cadillac CTS 2003, Инструкция к добавке

Страница: 48 / 85

2-26
Beam: This button allows you to input addresses or
telephone numbers you may have stored in your Palm
t
hand
-
held computing device directly into the Navigation
System.
When you press the Receive multi
-
function button, the
system will ask you to send the data. Hold the Palm near
the infrared receiver located in the upper right corner of
the screen and transmit. When the information has been
successfully received, you will be able to use it to help
plan your route.
After receiving the beamed data, the screen will display
this data. A search must be performed to find the
matching data in the navigation database. Turn the
TUNE/SEL knob to select a field to search, then press
the Search multi
-
function button. Search will be
highlighted if the field is searchable.
You may be requested to select a city or street to narrow
the search. After successfully finding the match in the
navigation database, you can use the multi
-
function
buttons to map, set the destination or calculate the route.
If the data cannot be found in the navigation database,
a message “no data found” will be displayed. If this
occurs, select another field to search. Repeat this process
until all search fields have been checked or a match
is found.
You may also select information from the All POI
(Points of Interest) or Nearby POI menus to send to
your Palm using the INFO button.
A second way to access the Beam screen is through the
Address Book screen. See “Address Book” in the Index
for more information.