EID-2 Optical Impression Device
Operation Manual
12
Publication SD08300-A (Rev. 1.05)
Using the Foot Pedal Unit
USING THE PEDALS
The foot pedal unit contains two pedals for activating the
scanning sequence and responding to screen questions. The
colors of the two foot pedals match the Pedals dialog in the
iTero OFFICE application (right is green, left is red).
LED INDICATOR
Pressing either foot pedal turns on the green LED. The battery needs to be replaced if any of
the following events occur:
Pressing a foot pedal causes the LED to blink (or the LED doesn
’
t light up at all).
Pressing a foot pedal causes no response within the iTero
software.
A warning appears requesting that the battery be replaced.
REPLACING BATTERY
To change the battery, follow the instructions below.
LED Indicator
