23
KOBE - FENICE - SPARK - INDACO - PRINCE - GO - ECLIPSE
6.17 CONCENTRIC PIPE-KIT ASSEMBLY
The stove is designed to be connected to a concentric pipe by means of a dedicated kit.
The upper exhaust with concentric pipe requires 1 kit code 5020002 (optional).
To assemble the kit, proceed as follows:
• Take the kit (see
Fig. 57
) and couple the pipe to the outlet of the fume exhaust of the stove (see
Fig. 58
).
• Insert the flexible pipe into the combustion air inlet pipe of the stove (see
Fig. 59
).
Fig. 57 - Concentric kit
Fig. 58 - Insert pipe d.80 mm
Fig. 59 - Insert combustion air pipe
• Secure the kit to the back of the stove with a clamp (see
Fig. 60
).
• The stove is ready to be connected to the flue (see
Fig. 61
).
Fig. 60 - Block with clamp
Fig. 61 - Position of the pipe
6.18 HOT HAIR DUCTING (ONLY VALID FOR DUCTED STOVES)
The stove has 1 hot air outlet which is rear-facing on the left-hand side by default. (see
Fig. 62
).
Fig. 62 - Ducting outlet
