Cadco UNOX BAKERLUX SHOP.Pro Touch, Руководство по эксплуатации

Страница: 31 / 34

31
BAKERLUX SHOP.Pro™ Touch
Alarms
The ovens show any alarm/warning messages relating to the oven or installed accessories on the screen.
The warning messages signal malfunctions that allow the appliance/accessories to continue operating, but with a restricted set of
functions.
The alarm messages (ALARM) identify issues that prevent any operation whatsoever of the appliances/ accessories, which therefore
must be put into STOP mode.
If the alarm messages refer to the connected accessories, the oven can still be used.
AF - OVEN ALARMS
Display Description Effect Solution
AF01 Motor thermal alarm
The oven stops any operating cycle
and blocks any screen display
configuration
Contact Cadco Customer Service
AF02 Safety thermostat alarm
AF03 Oven cavity alarm
AF04 Hood (?) Communications failure
alarm
WF - OVEN WARNING
Display Description Effect Solution
WF06
Warning: power board
temperature The oven will continue to operate,
but humidity detection is disabled
WF28
Warning: control board
temperature
The oven continues to run
WF33 SD card error The oven continues to run
WC - COOKER HOOD WARNING
Display Description Effect Solution
WC01 Smoke detector 1 broken
Smoke hood solenoid valve does
not open when a smoke
temperature probe is missing
Contact Cadco Customer Service
WC02 Board temperature error The hood continues to operate
WC05 Inlet fumes too hot The hood continues to operate
WC07 Communication lost Motor and smoke hood disengaged
Check the hood power cable; if the
problem persists, contact Cadco
Customer Service
AL - PROVER ALARM
Display Description Effect Solution
AL01 Cavity probe alarm The proofer stops any operating
cycle and blocks any screen
display configuration
Contact Cadco Customer Service
AL02 Communications failure alarm
WL - PROOFER WARNING
Display Description Effect Solution
WL02 Board temperature error The proofer continues to run