19
PROG PICTURE
STEP
6
Tap the icon "
PROG PICTURE
"
7
Choose the photo to go with the recipe.
8
Press the "
SAVE
" key to save the recipe.
9
The recently saved program is automatically stored in
the last position, after the other programs already in
the memory
.
The screen shows the "
CROISSANT
" recipe has been
added and saved.
To use the saved cooking cycles, access the
"
PROGRAMS
" section
"Proofer Programs
Menu" on page
21
You do not need to assign a name and photo to
the recipes that you want to save. In this case,
instead of the recipe name, the word "
PROG
"
and a number will appear. Again, the program is
automatically saved in the last position, after
the other programs already in the memory
.
10
Press the "
START/STOP
" icon: cooking will start
with the set parameters.
G
LEAVENING IN PROGRESS
1
If leavening requires preheating, the prover starts
to heat the cavity to bring it to the set
temperature (in the example 70°C). DO NOT place
dishes in the proofer during this step.
To skip preheating, see section
"Skip a
preheating cycle in progress"
on page
17
2
At the end of preheating, the prover beeps and the
screen shown appears (
INSERT TRAY
). Put the
food in the oven. When the door is closed, step 1
starts automatically according to the set
parameters.
3
During leavening, the time remaining until the
cycle is complete is shown on the screen (in the
example: 47 minutes), as well as the temperature
in the cavity (e.g. 45°C).
To view or change the parameters for a
leavening cycle in progress (e.g. lower the
temperature or extend the time), see
section
View/modify the parameters of leavening or
preheating in progress
on page
20
If you want to stop the cooking cycle in progress,
hold down the “
START/STOP
” button
(approximately 4-5 seconds).
Set preheating temperature
Current oven cavity temperature
Press the
“STEAM”
button
during
leavening
to feed in
steam until
you release
the button
Leavening with
continuous
operation
Leavening
by time
Содержание UNOX BAKERLUX SHOP.Pro Touch
Страница 1: ...1 BAKERLUX SHOP Pro Touch OPERATION MANUAL...
Страница 15: ...15...
Страница 26: ...26...