4
OPERATION INSTRUCTIONS
ON/OFF
Press ON/OFF to turn on the unit. Press ON/OFF again to turn it off.
NOTE: Fig.5 displays the unit’s OFF state after power on. Fig.6
displays the unit’s ON state after power on.
Fig. 5
-
OFF state
Fig. 6
-
ON state
MODE SETTING
Under the unit’s ON state, press MODE to switch between the
operation modes in the following sequence:
Auto−Cooling−Dry−Fan−Heating
Auto
Cooling
Dry
Fan
Heating
Fig. 7
-
MODE Setting
TEMPERATURE SETTING
Press
or
to increase or decrease the temperature. If these
buttons are pressed continuously, the temperature either increases
or decreases by 1.8
_
F (1
_
C) every 0.5s (see Fig. 8).
In the COOLING, DRY, FAN or HEATING mode, the
temperature setting range is 60.8
_
F ~ 86
_
F (16
_
C~30
_
C). In the
AUTO mode, the setting temperature can not be adjusted.
Fig. 8
-
Temperature Mode
FAN SETTING
Under the ON/OFF state, press FAN and the indoor unit’s fan
speed changes circularly (see Fig. 10).
Low
Middle
High
Fig. 9
-
Fan Mode
Enter/Cancel
Fan
Mode
Function
Timer
On/Off
AUTO
Fig. 10
-
Fan Mode