CAC / BDP CBMAAA060120, Руководство по установке

Страница: 18 / 52

18
Table 9 : Air Flow Data, Size 120
SW1- HEAT
DIP switch position
HEAT INPUT
(USGPH)
CFM avec SW3-ADJ
DIP switch position A
CFM with SW3-ADJ
DIP switch position B
CFM with SW3-ADJ
DIP switch position C
A (1=OFF, 2=OFF) 0.85 1450 1595 1305
B (1=ON, 2=OFF) 1.00 1700 1870 1530
C (1=OFF, 2=ON) 1.10 1850 2035 1665
D (1=ON, 2=ON)
SW2- COOL
DIP switch position
A/C size
(TON)
CFM with SW3-ADJ
DIP switch position A
CFM with SW3-ADJ
DIP switch position B
CFM with SW3-ADJ
DIP switch position C
A (1=OFF, 2=OFF) 5.0 1500 1725 1275
B (1=ON, 2=OFF) 4.0 1200 1380 1020
C (1=OFF, 2=ON) 3.5 1050 1205 890
D (1=ON, 2=ON) 3.0 900 1035 765
SW2- COOL
DIP switch position
A/C size
(TON)
CFM with SW3-ADJ
DIP switch position A
CFM with SW3-ADJ
DIP switch position B
CFM with SW3-ADJ
DIP switch position C
A (1=OFF, 2=OFF) 5.0 2000 2200 1800
B (1=ON, 2=OFF) 4.0 1600 1760 1440
C (1=OFF, 2=ON) 3.5 1400 1540 1260
D (1=ON, 2=ON) 3.0 1200 1320 1080
SW2- COOL
DIP switch position
A/C size
(TON)
CFM with SW3-ADJ
DIP switch position A
CFM with SW3-ADJ
DIP switch position B
CFM with SW3-ADJ
DIP switch position C
A (1=OFF, 2=OFF) 5.0 1600 1760 1440
B (1=ON, 2=OFF) 4.0 1280 1410 1150
C (1=OFF, 2=ON) 3.5 1120 1230 1010
D (1=ON, 2=ON) 3.0 960 1055 865
SW4- DELAY
DIP switch position
HEAT INPUT
(USGPH)
PreRun On-Delay
CFM Level - Time
ShortRun On-Delay
CFM Level - Time
Off-Delay
CFM Level - Time
A (1=OFF, 2=OFF) 0.85 13% - 45 sec. 44% - 30 sec 38% - 3 min.
B (1=ON, 2=OFF) 1.00 13% - 30 sec. 44% - 30 sec 38% - 3 min.
C (1=OFF, 2=ON) 1.10 13% - 30 sec. 50% - 30 sec 38% - 3 min.
D (1=ON, 2=ON) All 13% - 30 sec. 100% - 0 sec 100% - 2 min.
No adjustment
required
A/C size
PreRun On-Delay
CFM Level - Time
ShortRun On-Delay
CFM Level - Time
Off-Delay
CFM Level - Time
- All No delay No delay 100% - 90 sec.
PreRun and ShortRun are the periods of time when the the blower starts at very low CFM to minimize the distributon of cool air
Off Delay is the time required to cool down the coil (heating mode) with low CFM, to mimimize cool draft in the air distribution system.
COOLING MODE OR HEAT PUMP HEATING MODE - 2-SPEED LOW
24 VAC input (R) to G, Y1 and O (for cooling)
DELAY PROFILE FOR OIL HEATING MODE
PreRun and ShortRun are the periods of time when the the blower starts at very low CFM to minimize the distributon of cool air
in the system and then runs up to normal speed.
Off Delay is the time required to cool down the heat exchanger with low CFM, to minimize cool draft in the air distribution system.
DELAY PROFILE FOR COOLING OR HEAT PUMP HEATING MODE
in the system and then runs up to normal speed.
Note: In Cooling - Dehumidification mode, with no 24 VAC input to DH, the CFM are reduced by 15%.
Note: In Cooling - Dehumidification mode, with no 24 VAC input to DH, the CFM are reduced by 15%.
OIL HEATING MODE
24 VAC input (R) on W only
Same value as DIP switch position C
CONTINUOUS FAN
24 VAC input (R) on G only
COOLING OR HEAT PUMP HEATING MODE - SINGLE SPEED OR 2-SPEED HIGH
24 VAC input (R) to G, Y/Y2 and O (for cooling)