Chapter 2: LM Security Screens for 6E123-50 and 6E133-49
2-2
Local Management Supplement
The following introduces each screen that is accessible from the Repeater
Configuration Menu.
REPEATER LEVEL SECURITY CONFIGURATION
Used to set the security state for all ports on one connector
simultaneously. The ports can be set to receive all frames (NonSecure
state), lock on the source address of the next frame received
(LockOnNext) or lock on a specific address (LockedOnAddr). For details,
refer to
Section 2.2
.
PORT LEVEL SECURITY CONFIGURATION
Used to set the security for each individual port of a connector. For
details, refer to
Section 2.3
.
2.2
REPEATER LEVEL SECURITY CONFIGURATION
The Repeater Level Security Configuration screen,
Figure 2-2
, is used to
set the security state for all ports on a connector. A connector can be set to
receive all frames (NonSecure state), lock on the source address of the
next frame received (LockOnNext), or lock on a specific address
(LockedOnAddr). When either of the last two options are set, the switch
can be set to receive or not receive frames and to send or not send traps
when an intruder is detected.
To access the Repeater Level Security Configuration screen, use the arrow
keys to highlight the REPEATER LEVEL SECURITY
CONFIGURATION menu item on the Repeater Configuration Menu
screen and press ENTER. The Repeater Level Security Configuration
screen displays.
