Port Level Security Configuration Screen
Local Management Supplement
3-13
Address (Modifiable)
Used to enter the source MAC address for the LockedOnAddr security
state setting. Once a secure address is defined on a port, only those frames
received with that same source address are allowed on that port. Any other
frame detected with a different address is considered as an intruder,
causing the actions selected in the Action On Intruder field to be executed.
When the security state setting is NonSecure, the field displays the source
address of the last frame.
The Address column will display the MAC source address that will be
used for the Security States NonSecure or LockedOnAddr. This may be
the last address seen (NonSecure) or the address manually entered for the
LockedOnAddr Security State.
CONNECTOR # (Selectable)
This command field selects the front panel connector to which the port
security settings will be applied.
3.4.1
Setting the Port Level Security
To set the security for each repeater port on a connector, proceed as
follows:
1.
Use the arrow keys to highlight the CONNECTOR # field.
2.
Use the SPACE bar to step to the appropriate connector (CONN)
number.
3.
Press ENTER to display the 12 ports of the selected connector.
4.
Use the arrow keys to highlight the Security State field for the desired
repeater port.
5.
Use the SPACE bar to step to the appropriate security level
(NonSecure, LockOnNext, or LockedOnAddr).
6.
If the security level chosen causes the DisablePort and SendTrap
fields to display under Action On Intruder, use the arrow keys to
highlight the DisablePort field.
If the security level chosen does not cause the fields to display under
Action On Intruder, proceed to
step 12
.
