Port Level Security Configuration Screen
Local Management Supplement
3-11
The following section defines the fields on the Port Level Security
Configuration screen.
Port (Read-only)
Indicates the repeater port on the connector selected in the
CONNECTOR # field. Refer to
Table 3-4
for the connector/repeater port
relationship on the module.
Network (Read-only)
Indicates the network to which the port is currently attached.
Table 3-5
shows the association between the connector (CONN) and Network on
the module.
NOTE
The screen will not refresh automatically. To check if the states
have changed, such as from LockOnNext to LockedOnAddr,
the screen must be exited (Return may be used) and
re-entered to see the changed state.
Table 3-4
CONN/Repeater Port Relationship
6H123-50
6H133-37
CONN 1 = Repeater ports 1 – 12
CONN 1 = Repeater ports 1 – 12
CONN 2 = Repeater ports 13 – 24
CONN 2 = Repeater ports 13 – 24
CONN 3 = Repeater ports 25 – 36
CONN 3 = Repeater ports 25 – 36
CONN 4 = Repeater ports 37 – 48
Table 3-5
CONN/Network Organization
6H123-50
6H133-37
CONN 1 = Network 1, 10 Mbps
Network 2, 100 Mbps
CONN 1 = Network 1, 10 Mbps
Network 2, 100 Mbps
CONN 2 = Network 3, 10 Mbps
Network 4, 100 Mbps
CONN 2 = Network 3, 10 Mbps
Network 4, 100 Mbps
CONN 3 = Network 5, 10 Mbps
Network 6, 100 Mbps
CONN 3 = Network 5, 10 Mbps
Network 6, 100 Mbps
CONN 4 = Network 7, 10 Mbps
Network 8, 100 Mbps
HSIM = Port 7
