Port Configuration Menu Screen
Local Management Supplement
1-27
1.10
PORT CONFIGURATION MENU SCREEN
The Port Configuration Menu screen,
Figure 1-11
, is used to select
screens to perform port configuration tasks on the SmartSwitch.
To access the Port Configuration Menu screen from the Module
Configuration Menu screen, use the arrow keys to highlight the PORT
CONFIGURATION MENU item and press ENTER. The Port
Configuration Menu screen displays.
Figure 1-11
Port Configuration Menu Screen
The following briefly defines each selectable item of the Port
Configuration Menu screen:
ETHERNET FULL DUPLEX CONFIGURATION
The Ethernet Full Duplex Configuration screen allows each 10 Mbps port
to be set for either Standard Ethernet or Full Duplex operation. The screen
also indicates whether or not each port is linked to another 10BASE-T
module and if that port is enabled. For details, refer to
Section 1.11
.
NOTE
The Repeater Configuration Menu screen and its subordinate
screens apply only to the repeater devices 6E123-50,
6E133-49, 6H123-50, and 6H133-37.
ETHERNET FULL DUPLEX CONFIGURATION
HIGH SPEED INTERFACE CONFIGURATION
SMARTTRUNK CONFIGURATION
PORT REDIRECT CONFIGURATION
BROADCAST SUPPRESSION CONFIGURATION
REPEATER CONFIGURATION MENU
27622_20
EXIT
RETURN
