Port Redirect/Redirect Configuration Menu Screen (Chassis)
Local Management Supplement
1-7
SNMP COMMUNITY NAMES
Used to enter new, change, or review the community names used as
access passwords for module management operation. Access is limited
based on the password level of the user. For details, refer to your
SmartSwitch user’s guide.
SNMP TRAPS
Provides display and configuration access to the table of IP addresses
used for trap destinations and associated community names. For details,
refer to your SmartSwitch user’s guide.
CHASSIS ENVIRONMENTAL
Provides access to the chassis power supply status, power supply
redundancy status, and chassis fan tray status. For details, refer to your
SmartSwitch user’s guide.
PORT REDIRECT
Provides access to the Redirect Configuration Menu, which provides
access to the Port Redirect Configuration and VLAN Configuration
screens. For details, refer to
Section 1.4
.
1.4
PORT REDIRECT/REDIRECT CONFIGURATION
MENU SCREEN (CHASSIS)
The Redirect Configuration Menu screen (
Figure 1-5
) for the chassis
provides access to the Port Redirect Configuration and VLAN Redirect
Configuration screens. Any combination, up to 128, of port and/or VLAN
redirect instances can be configured per installed module, giving a
maximum of 640 instances for a chassis with 5 modules. Up to 24
instances per module can be configured as remote instances to other
modules in the chassis.
NOTE
The Redirect Configuration Menu screen displays only when
the operational mode of one or more of the modules in the
chassis are set to 802.1Q switching. If no modules in the
chassis are set to 802.1Q switching, the Redirect Configuration
Menu screen will display directly when the Port Redirect field is
selected, and the VLAN Redirect Configuration screen will not
be accessible.
