Cabletron Systems FLIU-1, Руководство по установке, Страница: 27 / 40

INSTALLING SYSTEM SOFTWARE
Page 3 - 1
CHAPTER 3
INSTALLING SYSTEM SOFTWARE
The FreeLINK Wireless LAN software conÞgures the FreeLINK
network and maintains an internal list of wireless transceiver serial
numbers to prevent unauthorized network access. The wireless
hub will automatically refuse access privileges to any wireless
transceiver with an unrecognizable serial number.
The FreeLINK Wireless LAN software is compatible with any
SNMP-compliant network management application, such as
Cabletron SystemsÕ Remote LANVIEW/Windows, or SPECTRUM.
3.1 CONFIGURING THE SOFTWARE
The FreeLINK Wireless LAN software is supplied on a 3
1
Ú
2
inch
DOS format ßoppy diskette. We suggest that you make a copy of
the diskette to use for software installation, and put the original in
a safe place.
Installation of system software is a two-step process. The software
is Þrst conÞgured using a PC, and then, after conÞguration, it is
installed into the wireless hub. To conÞgure the FreeLINK Wireless
LAN software follow the steps outlined below:
¥ With the PC powered on and booted up, insert the software
diskette copy into a ßoppy drive. Select the drive, and type:
SETUP <Enter> at the prompt. The Copyright screen will
appear. Press <Enter> to move to the next screen.
NOTE:
To conÞgure the Wireless LAN software you will need an IBM
PC or compatible, and DOS version 3.X or later.