Cabletron Systems CSMIM-T1, Руководство по установке

Страница: 196 / 198

INDEX
INDEX-8 CSMIM-T1 Hardware Installation Guide
repeat dial 7-11
repeat dial command 7-11
repeat last command 7-2
reset command 7-40
reset command reference 4-5
reset modem 7-40
respond to loopback register 7-49
respond to remote digital
loopback 6-19, 7-34
restore
factory default settings 7-40
saved configuration settings 7-40
restore factory default settings 7-15
result code form 7-35
result code register 7-45
result codes 6-20
extended 7-38
long/short 7-35
MNP 7-35
on/off 7-30
result codes, extended 7-38
result codes, longhort 7-35
retrain 7-13
retrain command 7-13
retrain sequence 7-27
retrain, begin 7-27
return to command state modifier 7-9
ring
to auto-answer on 7-42
ring counter register 7-42
ring to auto-answer on 7-42
ROM Monitor
command syntax 3-1
commands 3-1
list of commands 3-1
RTS 7-32, 7-48, 7-50
RTS/CTS options 7-32
S
S registers, displaying 7-32
S registers, overview 7-41
S registers, read 7-32
saved configuration
settings 7-37, 7-40
secondary XOFF character 7-54
secondary XON character 7-54
Self-booting 2-15
sequence command 3-21
examples 3-21
Serial Devices 2-8, 2-9
serial port
clear speed 7-34
flow control 7-25, 7-30
speed 7-17
serial port bps rate 7-3
serial port DSR/CTS control 7-11
serial port parity command 7-28
serial port test 6-17, 6-18
serial port, test 6-16
serial-port DCD control 7-5
serial-port flow control 7-30
serial-port speed register 7-49
serial-port speed, clear 7-34
serial-port, speed display 7-36
set command
reference 4-5
setting
boot sequence 3-21
broadcast address 3-5
Internet address 3-4
IP encapsulation 3-5
load/dump gateway address 3-5
preferred load host address 3-5
SLIP parameters 3-22
subnet mask 3-5
setting protocols by commands 6-10
settings, read current 7-33
short form result codes 7-35
show command reference 4-5
single cellular connection 7-7
SLIP
parameters 3-23
slip command 3-22
example 3-24