PVC Addendum to the 9A686-04/9A656-04 Configuration Guide
9033126-01
Page 16 of 43
Create a Traffic Descriptor
The following subsections provide instructions on creating a traffic descriptor profile to be assigned to the
PVC. Multiple PVCs can share the same traffic descriptor, however, the user MUST create at least one
traffic descriptor.
Step 3. Assign a value to the instance of the traffic descriptor.
The following section describes how to assign a user-defined value to the traffic descriptor to be created.
Refer to
Figure 7
.
Figure 7 Assigning a Value to the Traffic Descriptor
Figure 7
contains two callouts, which are defined as follows:
A
Displays the MIB command used to view this information (atmTrafficDescrRowStatus) and the OID
string used to access this command (1.3.6.1.2.1.37.1.5.1.9).
!
CAUTION
The 9A686-04 and 9A656-04 create two default traffic descriptors upon initial start-up,
however, these must NOT be used for PVCs.
A
B
