Cabletron Systems 6H133-37, Руководство пользователя, Страница: 132 / 204

Chapter 5: Local Management
5-82 6H123-50 and 6H133-37 User’s Guide
5.23 PORT REDIRECT FUNCTION SCREEN
The Port Redirect Function screen, Figure 5-29 , enables the user to set
each one of the ports on the 6H123-50 and 6H133-37 as a source or
destination port. Any port can be set to have one or more destination
ports. For example, port 1 can be set as a source port with three
destinations, ports 2, 3, and 4. Traffic from port 1 is then automatically
redirected to ports 2, 3, and 4. Port 1 can also serve as a destination port
for other ports. The port redirect function is extremely useful for
troubleshooting purposes, as it allows traffic to be sent to a particular
port(s) where, with the use of an analyzer or RMON probe, all current
traffic from the source port(s) can be examined.
Table 5-5 shows the
CONN/port organization.
Port Redirect operates at a switch interface level and not at a repeater port
level. If traffic is redirected to interfaces that include active repeater ports
then the redirected traffic is transmitted out all of the repeater ports
connected to the interface.
Table 5-5 CONN/Port Organization
6H123-50 6H133-37
CONN 1 = Network Port 1, 10 Mbps
Network Port 2, 100 Mbps
CONN 1 = Network Port 1, 10 Mbps
Network Port 2, 100 Mbps
CONN 2 = Network Port 3, 10 Mbps
Network Port 4, 100 Mbps
CONN 2 = Network Port 3, 10 Mbps
Network Port 4, 100 Mbps
CONN 3 = Network Port 5, 10 Mbps
Network Port 6, 100 Mbps
CONN 3 = Network Port 5, 10 Mbps
Network Port 6, 100 Mbps
CONN 4 = Network Port 7, 10 Mbps
Network Port 8, 100 Mbps
HSIM = Port 7
Fast Ethernet Slot 5 = Port 9
Fast Ethernet Slot 6 = Port 10
NOTE
Although all traffic from the source port (including, if desired,
errored frames) is sent to the destination port, normal switching
is still performed for all frames on the source port.