Cabletron Systems 2000, Руководство по началу работы, Страница: 42 / 92

Chapter 2: Hardware Installation
42 SmartSwitch Router 2000 Getting Started Guide
• Never operate the SSR 2000 with exposed expansion slots.
• Never operate the SSR 2000 if the it becomes wet or the area where it has been installed
is wet.
Preventing Equipment Damage
Observe the precautions listed in this section to prevent accidental damage to the
SSR 2000 components.
Caution
: To prevent accidental product damage, observe the following precautions:
• Always use proper electrostatic discharge (ESD) gear when handling expansion
modules or other internal parts of the chassis.
• Make sure you allow adequate room for air flow around the SSR 2000.
Hardware Specifications
The following table lists the physical and environmental specifications for the SSR 2000.
Installing the Hardware
This section describes how to perform the following tasks:
• Verifying your shipment
• Installing the chassis (on a tabletop or in an equipment rack)
• Installing expansion modules
Table 15. SSR 2000 physical and environmental specifications
Dimensions Inches: 2.8” (height) x 17” (width) x 18.5” (depth)
Centimeters: 7.1cm x 43.2cm x 47cm
Weight Pounds: 22
Kilograms: 10
Power 100-125 VAC, 4 A maximum;
200-240 VAC, 2 A maximum
Operating temperature Fahrenheit: 41
o
F to 104
o
F
Centigrade: 5
o
C to 40
o
C