Cabletron Systems 2000, Руководство по началу работы, Страница: 35 / 92

SmartSwitch Router 2000 Getting Started Guide 35
Chapter 1: Features Overview
Cabling and Connector Specifications
The following table lists the media specifications for the 1000BASE-SX expansion module.
LEDs
The 1000BASE-SX expansion module uses the following LEDs.
Table 9. 1000BASE-SX expansion module specifications
Port type Specification
1000Base-SX • 802.3z standard (also uses 802.3x for flow control)
• SC-style Media Interface Connector (MIC)
• 62.5 micron or 50 micron multimode fiber-optic cable
• Maximum 275 meters (902 feet) segment length for 62.5 micron
fiber-optic cable, based on installed fiber bandwidth
• Maximum 550 meters (1804 feet) segment length for 50 micron
fiber-optic cable, based on installed fiber bandwidth
Table 10. 1000BASE-SX expansion module LEDs
LED Description
Per-port Link • Green – indicates that the port hardware detects a cable plugged
into the port and a good link is established.
• Red (intermittent) – indicates that the port received an error
during operation.
• Red (solid) – indicates that the port hardware detects a cable
plugged into the port, however, a bad link is established.
• Off – indicates that no link from exists with the port.
Per-port Rx • Green – indicates when the port’s transceiver receives packets.
• Orange – indicates when the port’s transceiver receives flow-
control packets.
Per-port Tx • Green – indicates when the port’s transceiver transmits packets.
• Orange – indicates when the port’s transceiver transmits flow-
control packets.