Terminating a Cat5/Cat5E/Cat6 Cable Using the Tool-less IDC
1)
Open the plug by lifting the clear plastic end
2)
Pin 1 of the connector is on the left side of the clear plastic shell while Pin 8 is on
the right side of the connector (with RJ45 connector facing away from you)
3)
Thread the white/orange conductor on your Cat5/5E/6 cable into Pin 1
4)
Thread the orange conductor on your Cat5/5E/6 cable into Pin 2
5)
Thread the white/green conductor on your Cat5/5E/6 cable into Pin 3
6)
Thread the blue conductor on your Cat5/5E/6 cable into Pin 4
7)
Thread the white/blue conductor on your Cat5/5E/6 cable into Pin 5
8)
Thread the green conductor on your Cat5/5E/6 cable into Pin 6
9)
Thread the white/brown conductor on your Cat5/5E/6 cable into Pin 7
10)
Thread the brown conductor on your Cat5/5E/6 cable into Pin 8
11)
Repeat steps 1-10 to terminate the other end of your Cat5/5E/6 cable
Pin 8
Pin 1
5
