9
4.2 Peel-off Adapter PS5
PS5 can be operated in three different modes depending on the jumper
setting and the external circuit.
4.2.1
Mode 1a - Starting Print and Confirming Label Removal with Two
Signals
Figure 2 Jumper at position
JP1
Send a print job.
Activate
XSTART
.
The first label will be printed an transported to the peel position.
Remove the label.
Confirm the label removal with signal
XETE
.
Activate
XSTART
to start the next cycle.
XSTART
XFEH
XETE
XESP
XEDG
XDNB
XEDST
GND
RXSTART
RXFEH
RXETE
GND
STA
RUEL
P24
Figure 3 External minimal circuit at the peripheral interface for mode 1a
