16
16
5
Printer Configuration
Machine Parameters
Press the
menu
button.
Select
Setup > Machine param.
.
Parameter
Meaning
Default
Demand sensor
Configuration of the peel-off parameters for
devices with peel-off function.
> Peel position
Shift the position of the dispensed
label relative to the dispensing
edge.
The
Peel position
can also
be set via software. The offset
values from the
Machine param.
menu and the software are added
together.
0,0 mm
> Backfeed
delay
Delay time between removing the
label from the peel position and the
backfeed of the label.
250 ms
> Limit
peel-off spd.
Limitation of the print speed in
the peel-off mode to 100 mm/s
(203/300 dpi) respectively 50 mm/s
(600 dpi)..
On
Table 3
Parameters of the menu
Setup > Machine param.
> Demand sensor
Print Parameters
Press the
menu
button.
Select
Setup > Print param.
.
Parameter
Meaning
Default
Backfeed
Method for backfeeding the label medium.
Backfeeding is necessary in the peel-off mode
since the front edge of the following has already
passed the print line when peeling off the first
label
always:
Backfeeding occurs independently of
label contents.
smart:
Backfeeding only occurs when the next
label is not yet fully prepared when peeling off
the current label. Otherwise, the second label is
pushed on and completed after removal of the
first label without backfeeding.
smart
Table 4
Parameters of the menu
Setup > Print param.
> Backfeed
