Pic. 28
Pic. 29
Pic. 30
Pic. 31
CLEANING OPERATION
To remove spiral blade put fingers on the plate part of the spiral and pull it onwards
gently as shown in Pict. 28 & 29.
Remove bowl gasket from the back part
of the evaporator tube (see Pict. 31).
Once the spiral blade is removed
completely remove the suction cap
gasket from the front spiral as shown in
Pict. 30
ATTENTION: Place all the components in a safe place in order to be sure they
are not lost.
NOTE: Do not use too hot water to clean the plastic components .
Clean the components with dish-washing soap and tepid water. Never use abrasive
cleaners.
7
