Pic. 39
Pic. 38
CORRECT
INCORRECT
Reassembly of the parts removed during the cleaning.
Before reassebling of parts, clean the evaporapor tube and drip trays & grids without using abrasive
cleaners. Before reassemblyng the bowl gasket rinse it with water in order to facilitate the assembly
of the bowl.
Lubricate the front part of evaporator tube as indicated in Pict. 39/ . Insert the spiral blade by
pushing it gently and deeply as indicated in Pict. 40a & 40b. After this it is important to lubricate the
head of the spiral (see Pict. 34/ ).
1
2
1
Lubricate
2
REASSEMBLY OF THE COMPONENTS
Put the bowl gasket in its position on the back part of the evaporator tube.
Once the bowl gasket is in its right position press it with your thumbs first in the lower part and then
progressively towards its upper part (marking a circle with your fingers); until it is correctly fixed in its
site (see Pict. 36 & 37).
Insert the suction cap gasket into the
spiral blade by pushing it deeply (see
Pict. 38).
Lubricate with lubricanrs provided in the
machine like shown in Picture 38.
Pic. 36
Pic. 37
Pic. 40a
Pic. 40b
9
