![background image](http://html1.mh-extra.com/html/cab/a-series/a-series_programming-manual_3173685168.webp)
168
cab Produkttechnik GmbH & Co KG
168
PRODUCT MARKING AND BARCODE IDENTIFICATION
Hermes
Apollo
A-series
This
function is
available
for:
[TABLE OF CONTENTS] [COMMAND LIST]
M-series
X - Synchronous Peripheral Signal Settings
The X command can be used to control external devices.
X y[;ao] CR
X =
Synchronous Peripheral Signal Setting Command
y =
Printing coordinate when a signal should be set. Distance from print start
to start of the signal in millimeters or inches. (See the m command for the
measurement settings.
ao=
hex nibbles to set or to reset the signal
Function and settings depend on the used printer type and the peripheral connector. Please refer to
the operator´s manual and to the documentation for the optional devices for each printer model.
The "X" command needs to be placed after the definition of the page size ! ("S"- command)
Syntax: