C2R Colibri 5 30-001, Руководство пользователя

Страница: 50 / 168

Colibri serie 5 : User’s guide
© 2000-2008 C2R Technologie, Sarl. All rights reserved.
50 50
Rev. C
interfunction, and intermessage delays slow the transmission of data, increasing data integrity.
Each delay is composed of a 5 millisecond step. You can program up to 99 steps(of 5 ms each)
for a range of 0-495 ms.
Intercharacter Delay
An intercharacter delay of up to 495 milliseconds may be placed between the transmission of
each character of scanned data. Scan the Intercharacter Delay bar code below, then scan the
number of milliseconds and the SAVE bar code using the Programming Chart inside the back
cover of this manual.
To remove this delay, scan the Intercharacter Delay bar code, then set the number of steps to 0.
Scan the SAVE bar code using the Programming Chart inside the back cover of this manual.
Note: Intercharacter delays are not supported in USB serial emulation.
User Specified Intercharacter Delay
An intercharacter delay of up to 495 milliseconds may be placed after the transmission of a
particular character of scanned data. Scan the Delay Length bar code below, then scan the
number of milliseconds and the SAVE bar code using the Programming Chart inside the back
cover of this manual.
Next, scan the Character to Trigger Delay bar code, then the 2-digit hex value for the ASCII
character that will trigger the delay ASCII Conversion Chart (Codepage 1252), page 157.
Delay Length Character to Trigger Delay
To remove this delay, scan the
Delay Length bar code, and set the number of steps to 0. Scan
the SAVE bar code using the Programming Chart inside the back cover of this manual.
Interfunction Delay
An interfunction delay of up to 495 milliseconds may be placed between the transmission of each
segment of the message string. Scan the
Interfunction Delay bar code below, then scan the
number of milliseconds and the SAVE bar code using the Programming Chart inside the back
cover of this manual.