C2R Colibri 5 30-001, Руководство пользователя

Страница: 97 / 168

Colibri serie 5 : User’s guide
© 2000-2008 C2R Technologie, Sarl. All rights reserved
97
Rev. C
Example of Target Set
Point Percentage at
97%:
Example of Target Set Point
Percentage at
50%:
Example of Target Set Point
Percentage at
40%:
Image Ship - IMGSHP
An image is taken whenever the Image Snap (IMGSNP) command is processed. The last image
is always stored in memory. You may “ship” the image by using the IMGSHP command.
The image ship command has many different modifiers that can be used to change the look of the
image output by the scanner. Modifiers affect the image that is transmitted, but do not affect the
image in memory. Modifiers always begin with numbers and end with a letter (case insensitive).
Any number of modifiers may be appended to the IMGSHP command. For example, you can use
the following command to ship a bitmap image with gamma correction and document image
filtering:
IMGSHP8F75K26U
IMGSHP Modifiers
A - Infinity Filter: Enhances pictures taken from very long distances (greater than 10 feet or 3
m).

0A Infinity filter off (default)

1A Infinity filter on
Example of Infinity Filter off (0A) from
approximately 12 feet (3.66m) away:
Example of Infinity Filter on (1A) from
approximately 12 feet (3.66m) away:
C - Compensation: Flattens the image to account for variations in illumination across the image.

0C Compensation disabled (default)

1C Compensation enabled