C2R Colibri 5 30-001, Руководство пользователя

Страница: 59 / 168

Colibri serie 5 : User’s guide
© 2000-2008 C2R Technologie, Sarl. All rights reserved
59
Rev. C
When Check Character is set to Validate and Transmit , the imager will only read Codabar bar
codes printed with a check character, and will transmit this character at the end of the scanned
data.
When Check Character is set to
Validate, but Don’t Transmit , the unit will only read Codabar bar
codes printed with a check character, but will not transmit the check character with the scanned
data.
Codabar Concatenation
Codabar supports symbol concatenation. When you enable concatenation, the imager looks for a
Codabar symbol having a “D” start character, adjacent to a symbol having a “D” stop character. In
this case the two messages are concatenated into one with the “D” characters omitted. Default =
On.
Select Require to prevent the imager from decoding a single “D” Codabar symbol without its
companion. This selection has no effect on Codabar symbols without Stop/Start D characters.
Codabar Message Length