- 14 -
[Set pressure (kN)]: Display the pressure value set in the current test stage, that is, the loading
pressure set in the [Parameter Setting] interface;
Figure 6-2 test interface
[Current roundtrip times]: Display the number of round trips to the current test stage;
[Set roundtrip times]: Display the total number of round trips set in the current test stage, that is, the
number of round trips set in the [Parameter Setting] interface;
[Vibration frequency]: Display the vibration frequency set in the current test stage, that is, the
vibration frequency set in the [Parameter Setting] interface;
[P1 stage]: Click the "P1 stage" button, start the test according to the parameters set in the P1 stage,
and proceed to the P6 stage in turn, and end. The parameters of this stage are the parameters of
the corresponding stage set in the [Parameter Setting] interface. P2~P6 is similar to P1.
[Clear the Alarm]: If the device currently has an alarm code, click this button to clear it. In the
[Description of device status code] interface or refer to Appendix 2 of this manual, you can view the
fault codes and their solutions (If the failure is not solved, the alarm sound and alarm code still exist).
[Help & Settings]: Click this button to jump to the [Help & Settings] interface.
