- 13 -
Figure 6-1 Startup interface
Please read the "Matters needing attention" carefully and strictly abide by it;
View "Equipment Information". "Parameter download completed" and "correction table is
downloaded
" mark "√" in the box in front, indicating that the parameter download is normal;
Click the "Enter the Test" button to enter the [Test] interface.
Test interface
In the [Startup] interface shown in Figure 6-1, click the "Enter the Test" button, and the instrument
will enter the [Test] interface, as shown in Figure 6-2. The parameters and buttons are explained as
follows.
[Test time]: Start timing when the test starts, and stop timing when the test stops;
[Gas source pressure (MPa)]: Display the total air pressure entering the equipment;
[Device status code]: The device status code indicates the current working status of the device or
the fault that has occurred. For specific content, please refer to the status code description in the
appendix, and you can also directly query it in the device help;
[Current pressure (kN)]: Display the real-time pressure of the current test stage;
