C-Tech 16-T0012/P, Руководство по эксплуатации продукта

Страница: 7 / 19

- 5 -

1 set extractor

2 5CM
2
cone heads

2 10CM
2
cone heads

20 10CM
2
disposable cone heads

1 M8 Allen wrench

1 set of safety rod device
Safety components
 Safety pin with cotter pin to secure the ram probe on the striker.

2 safety bars for guiding the ram probe at the start of the probing.
WARNING!
The use of safety components increases occupational safety and is mandatory.
IV. Operation
The Operation section provides you with the information you need to put the PR13 into operation
immediately. Particular attention is drawn to possible dangers for humans or machines. However,
read section 2 "Safety" before reading further here and putting the PR13 into operation.
Check rule maintenance
1. Is the interior of the cylinder oiled with a suitable lubricant and is the piston rod free of dirt? (see
5.2)
Check the resistance-free fall of the ram weight.
2. Is the service cone greased?
3. Are there safety bolts and cotter pins for the striking piece?
4. Is the inner assembly O-ring for the piston lock undamaged and in position? (Slowly pull out
the cylinder tube and check the upper stop)