22 / 32
A long press on the
in
non-motion audio discrimination mode
EVO6000 into
non-motion single tone mode
.
Non-motion single tone mode
is designed to help you find deep targets on uneven or overgrown
sites where it is difficult to swing the detector and where you are interested in digging all targets. In
non-motion single tone mode
you do not have to sweep the
search head
. You can slowly move the
search head
around to find a target. In
non-motion single tone mode
the large numbers on the
screen will show the target ID. The volume of the tone reflects the signal strength.
In
non-motion single tone mode
, if you find that the detector is disturbed by changes in ground
conditions, use a short press on the
to reset the
baseline level
.
A long press on the
in
non-motion single tone mode
puts your EVO6000 into