Battery Information
Low Battery Warning - With 20 minutes of run time left, the detector will
beep, flash and display “LOW BAT”. Notifications will continue periodically until
the battery expires and the detector performs an automatic shutdown.
Charging - While charging, the battery icon will cycle and the detector will
display an approximate charge percentage. Full charge occurs in 4-6 hours.
For fastest charging, charge while detector is turned off.
Warning
- DO NOT charge the detector in a combustible atmosphere.
Warning
- DO NOT charge the detector in temperatures above 104°F (40°C)
or below 32°F (0°C).
Additional Questions?
For additional information on the
Multi Gas Clip
gas detector regarding
programing, bump testing, calibrating, etc. please refer to the
Multi Gas Clip
User’s Manual
. The manual, videos and other helpful information are available
for viewing or download at
www.gascliptech.com
.
Contact Information
Gas Clip Technologies, Inc.
305 W. FM 1382, Suite 540
Cedar Hill, TX 75104 USA
Phone: +1.972.775.7577
Fax: +1.972.775.2483
Toll Free: 1.877.525.0808
E-mail: [email protected]
Website: www.gascliptech.com
MGC QSG v2.02
Portable gas detectors you can count on
Portable gas detectors you can count on
Quick-Start Guide
Multi Gas Clip
Infrared
Multi Gas Clip
Pellistor
A
SS
EM
BLED IN U
SA
