16 / 32
Keypad
Using The Keypad For Motion Mode Detecting
When you are detecting, the
up and down buttons
adjust the
sensitivity
of your EVO6000. Turn
the
sensitivity
down if you find that you are getting spurious signals or you want to ignore some of
the smaller deeper targets.
Press the
pin point button
to switch to and from pin point
mode.
Press the
up or down buttons
to adjust sensitivity.
Press the
menu button
to open the menus.
Press the
OK button
to start and stop the on screen animation.
Using The Key Pad For Non-Motion Mode Detecting
A long press on the
pinpoint button
will switch the EVO6000 to
. The
pinpoint indicator
on the screen will flash and the
animation on the screen will change. In the two
pinpoint button
resets the
baseline level
. You will need to reset the
baseline level
when ground conditions change.
Long press the
pinpoint button
to switch between detecting
modes.
Short press the
pinpoint button
to reset the
baseline level
.
Press the
up or down buttons
to adjust sensitivity.
Press the
menu button
to open the menus.
Press the
OK button
to start and stop the on screen animation.