24 / 32
Headphones
The EVO6000 can be used with with
, without
headphones
or with
. If no
headphones
are connected, tones will be played through the built in
loudspeaker
.
The volume of the audio is controlled using the
master volume
control. Setting the
master volume
to zero will
mute
all audio.
Wireless Headphones
The EVO600 supports
aptX™ Low Latency Bluetooth
®
which delivers high quality wireless audio with
no perceptible delay when used with
aptX™ Low Latency Bluetooth
®
capable headphones
.
For best
results and support, we recommend C.Scope headphones.
Connecting and Disconnecting
To connect your
wireless headphones
for the first time you first need to
pair
them with your
EVO6000. Once your headphones have been paired and connected once they will be remembered by
your EVO6000 and will connect automatically each time your EVO6000 is turned on and whenever you
enable
Bluetooth
®
.
You can switch from
wireless headphones
back to the
loudspeaker
by switching off Bluetooth or by
turning off your
wireless headphones
. To switch off
Bluetooth
®
, choose
BLUETOOTH
from the
Master Volume, Backlight and Bluetooth
BLUETOOTH
again to turn
Bluetooth
®
back on and automatically reconnect with your
wireless headphones
.
Paring
Follow the instructions for your
wireless headphones
to put them into
pairing
mode. Normally you
make sure the
headphones
are turned off, then press and hold the on button on the
headphones
until you hear confirmation that they are
pairing
. While your
wireless headphones
are pairing ,
choose
PAIR
from the
Master Volume, Backlight and Bluetooth
Bluetooth
®
indicator
will flash slowly then quickly as
pairing
progresses.
Pairing
can take about a
minute. Once
pairing
completes, the name of the
headphones
will briefly appear on the
screen
and
the
headphones
will connect. The
Bluetooth
®
indicator
will be on, the
headphone indicator
will
show the headphone icon with waves and any sound will play over the
wireless headphones
. For help
with pairing check the
section.
Unparing
To forget a set of
wireless headphones
, choose
PAIR
from the
pairing
process on your wireless headphones. The
pairing
process will time out and the EVO6000 will no longer be paired to any wireless headphones.
Wired Headphones